Control your Jandy Aqualink Pool Controller via RS232 serial with this suite of three modules. Control includes the following:

• Adjustment of the setpoint for pool, pool 2, and spa
• Filter pump on/off, low speed/high speed
• Toggle between pool and spa mode
• Heater on/off for pool, pool 2, and spa
• Aux relay on/off control for 22 relays
• Aux dimming relay control for 5 dimmers
• Display setpoints and temperatures for pool, pool2, and spa
• Display air and solar temperature
• Display battery voltage

Version 2 functional updates

• Low backup battery flag
• On/Off/Toggle for all applicable functions
• Extra Aux for controlling the Solar relay as an Aux
• Firing status for each heater output

Version 2 also includes two new modules!  The first is a module to parse the LED feedback on the wall control.  This feedback is important when you need to know the intermediate status of pumps and heaters.  Intermediate status means that the function is locked out as a heater cools down, a valve finishes changing positions or a pump is shutting down water flow.  The second new module that is included controls a Jandy Chlorinator that is connected to the same bus as the Aqualink.

This module will support any of the RS series of controllers from Jandy, such as the RS-2/6, RS-4, RS-6, RS-8, RS-12, RS-16, RS2/10, RS-2/14, RS-2/22 and their combo equivalents. You will also need the Jandy RS Serial Adapter (Part Number 7620) in order to utilize this module. The Aqualink Power Center must be running firmware version "I" or above and the RS Serial Adapter must be running frimware version "C01".

Included with the 3 modules is a SIMPL Windows test program as well as a Xpanel and TPS-4500 test touchpanel file.

• Module Order Form (for fax orders)
• Jandy Aqualink V2 Module Help File