This module allows any 2-series or X-generation Crestron processor to control on or more (up to 16) Audio-Technica MX-381 automatic microphone mixers via a single RS-232 port. Many command are supported, including:

• Setup threshold level, gate hold time, and individual channel gate attenuation levels
• Activate and deactivate input attenuation on a channel-by-channel basis
• Turn phantom power on and off on a channel-by-channel basis
• Activate and deactivate priority status for each channel
• Enable and disable low cut filter for each channel
• Force individual channels gates open
• Force individual channels gates closed
• Configure each channel direct output to be either before or after the gate
• Configure main output as mic or line level
• Activate or deactivate output limiter
• Turn NOMA (Number of Open Microphones Attenuated) on or off
• Configure master LED display to be before or after the master volume knob
• Lock or unlock the keys on the front panel of the mixer
• Put mixer in auto or manual mode
• Polling for the total number of slave mixers connected

Multiple mixers that have been linked together using the MiniDin8 “link” connectors on the mixers can be controlled from the single RS-232 port on the master device.

To order this module, click Add to Cart below.  After completing our secure online checkout process, you will be able to instantly download the module.  You may also order by fax by downloading our PDF form below.

• Module Order Form (for fax orders)
• Audio-Technica_MX-381_Crestron_Module_Help_v1